Leviton WSS0S-P0G Wireless Self-Powered Remote Switch, Gray Review

Average Reviews:

(More customer reviews)I'm adding the reviews to the other components too, as based on my original writeup on the heart of the system, the WSS10 receiver.
Leviton WSS10-GDW Wireless Momentary Switch Relay, No Neutral, 120/277v, 1-Pole, White
The WSS0S series is the remote switch to the WSS10 series receivers. The one big aspect that sets this remote apart from many other remote-based switches is that no batteries or wiring is required; it is a spring-loaded self-powered switch. The switch may be surface mounted or recessed in a box with at least 5/8" clearance.
Versatility is a huge plus on this setup. The receiver can be set for up to 6 devices (switches or occupancy sensors), so one can readily make this a 4-way setup and beyond. The transmission signal is digital and each device has its own 32-bit address, so interference is extremely unlikely even with multiple receivers in the same vicinity.
Yes, this setup does cost more than other wireless 3-way switches, but the others are not commercial-grade, nor versatile to be used as 4-way switches and/or with occupancy sensors. Installation is quick, as the only wiring involved is in replacing the wall switch with the receiver; there's no need for wiring through walls or ceilings, no patching, and no bill for the hours of labor by an electrician. And it's that last part makes going with this setup a much cheaper option.

Click Here to see more reviews about: Leviton WSS0S-P0G Wireless Self-Powered Remote Switch, Gray

Get 30% OFF

Click here for more information about Leviton WSS0S-P0G Wireless Self-Powered Remote Switch, Gray