Average Reviews:
(More customer reviews)I had to use heavy plastic sheeting in the basement in an area where there was going to be a lot of dust. At first, I was just lifting the plastic up and down, and stapling it to some 2x4's but that became a pain in the butt, and I was using a lot of staples. I put this zipper on, and used the enclosed tool to cut the sheeting and it worked very well. it's easy to use and cheap, I couldnt be happier with this purchase
Click Here to see more reviews about:
ZipWall HDAZ2 Heavy Duty Zipper Kit, 2-PackWhen you need an easy way to create a doorway for a high-traffic job site where people, equipment, and building materials are constantly moving in and out, the ZipWall HDAZ2 Heavy Duty Zipper Kit is the ideal choice. This professional-quality, super-rugged zipper kit can be used to create a sealable doorway in any plastic sheeting.
Note: This package contains two seven-foot-long Heavy Duty Zippers and one ZipWall Zipper Knife. Just starting out? For a complete barrier system starter kit, try the ZipWall 4PL 4-Pack Plus Kit with Carry Bag, which can be used without Foam Rails on small jobs up to 30 linear feet or with Foam Rails on jobs up to 10 linear feet. For jobs up to 50 linear feet, the RLFP Facility Pack Kit with six 12-foot Poles, Caution Tape Reel System and Carry Bag is an ideal start to a barrier system (Foam Rails are not included in the RLFP and barrier material, such as plastic sheeting, must be purchased separately).
Ideal for High-Traffic or Low-Temperature Construction AreasThe ZipWall Heavy Duty Zipper Kit is the easy way to create a doorway anywhere in plastic sheeting. This zipper is ideal if your workspace barrier will be up for a while, if there will be a lot of traffic in and out, or if the temperature at your worksite will go below freezing.
Use one zipper for a simple doorway or place two zippers side by side to create a wide roll-up doorway.
Easy to Install and UseInstalling a ZipWall Heavy Duty Zipper is easy. Simply unroll the zipper and determine where to place it on your barrier. Be sure the pull is at the bottom and the end of the zipper is below where the plastic bends as it meets the floor.
Then, starting at the top, peel the backing off the zipper and press the zipper firmly onto the sheeting.
When the zipper is in place, open it completely and cut the opening with the included ZipWall Zipper Knife. This handy knife cuts a 3/4-inch-wide channel in the plastic sheeting, so the zipper teeth won't catch on the sheeting and bind.
Works with All ZipWall ProductsThe ZipWall Heavy Duty Zipper can be used as part of a ZipWall Barrier System. By purchasing ZipWall 12-foot SLP poles or 20-foot KT-20 poles and ZipWall Tight Seal accessories, you can create a dust barrier without marring walls or ceilings. You can also purchase the ZipWall 4PL 4-Pack Plus Kit with Carry Bag or the RLFP Facility Pack with Caution Tape Reel System and Carry Bag. Both include everything you need to create a ZipWall Barrier System.
Protect Children and Property from Lead-Dust ContaminationProviding a dust-tight seal around worksites is very important, especially when doing demolition or when renovating an older home that has lead paint. In fact, the Environmental Protection Agency (EPA) mandates that dust be contained when as little as six square feet of lead paint is disturbed in homes or facilities where there are children under six years old.
Go to www.epa.gov/lead to get details on the latest lead-safety rules and lead-safe work practices. New EPA laws are an important reason to keep a ZipWall Barrier System on hand.
What's in the BoxZipWall HDAZ2 Heavy Duty Zipper kit with two seven-foot-long Heavy Duty Zippers and one ZipWall Zipper Knife
Get 16% OFF
Click here for more information about ZipWall HDAZ2 Heavy Duty Zipper Kit, 2-Pack
