Showing posts with label contractor supply. Show all posts
Showing posts with label contractor supply. Show all posts

4/08/2012

Monte Carlo 5CY60RB Cyclone 60-Inch 5-Blade Outdoor Ceiling Fan, Roman Bronze Motor Finish and American Walnut ABS with Grain Blades Review

Monte Carlo 5CY60RB Cyclone 60-Inch 5-Blade Outdoor Ceiling Fan, Roman Bronze Motor Finish and American Walnut ABS with Grain Blades
Average Reviews:

(More customer reviews)
I bought this fan to put outside at our Boat slip at the marina. We had a Hampton Bay 48 inch outdoor fan from Home Depot up but wanted a wider radius. The 48 inch fan had great RPM's and a great wind/breeze maker but was just not wide enough to cover our deck at the lake. So we opted for this 60 inch outdoor fan. We went to install it, on a 4 foot down pole, like the Hampton Bay 48 inch and found, unlike all other standard fans, it takes a 1/2 inch rod instead of the industry standard 3/8's inch rod. Well, they don't make one so we had to custom make one out of a 48 inch galvanized steel pole for plumbing. That worked fine.
However, once we had it installed, thats when we found the most disappointing thing. Unlike ALL ceiling fans we have owned for more than 25-30 years, this fan, ON HIGH, moved like most fans on low to medium. We thought we had something hooked up wrong, so we spend 2 hours taking it back down, analizing it and putting it back up to find it still moved slower on high than any other fan we have ever seen. It did not hardly move any air/wind outdoors, being it was an outdoor fan.
Once we got home from the lake, I looked up on the companies web site montecarlofans dot com, and found the RPM's for this fan are HORRIBLE.
On Low, the RPMS are only 37 RPM's... thats 1 rotation per 2 seconds... on HIGH, the RPM's are a laughable 147 which is approx 2 1/2 Rotations per minute... unlike nearly every other ceiling fan, when you put them on high, you can barely make out the blades they are turning so fast, you can literally count the rotations with this one they are turning so slowly. and you can make out each blade on High...
I would HIGHLY discourage anyone from buying this fan. The NON Standard size down pole fittings and the HORRIBLY slow RPM's make this fan only good for 'atmosphere', not for 'functionality'.
thanks.... winterstone

Click Here to see more reviews about: Monte Carlo 5CY60RB Cyclone 60-Inch 5-Blade Outdoor Ceiling Fan, Roman Bronze Motor Finish and American Walnut ABS with Grain Blades

The Monte Carlo Fan 5CY60RB is a Cyclone Ceiling Fan with the Three Speed Pull Chain in the Roman Bronze motor finish. A quality, high performance fan that delivers comfort and energy efficiency. This Ceiling Fan is from the Cyclone Collection and is UL Wet rated. The Cyclone Includes 4" (1/2" Interior Diameter) Pole.

Buy NowGet 38% OFF

Click here for more information about Monte Carlo 5CY60RB Cyclone 60-Inch 5-Blade Outdoor Ceiling Fan, Roman Bronze Motor Finish and American Walnut ABS with Grain Blades

1/12/2012

Werner AA8 250-Pound Duty Rating Televator Aluminum Universal Telescoping Attic Ladder, 8-Foot Review

Werner AA8 250-Pound Duty Rating Televator Aluminum Universal Telescoping Attic Ladder, 8-Foot
Average Reviews:

(More customer reviews)
I bought a 8' televator ladder. The ladder installation was simple. The instruction were great (and I am not a handy person). They claim it's a one person job. I found that to be quite true. There is a well thought out installaiton procedure and well designed parts (assuming you read directions carefully). The only down side is that it does not come with a door. I assume this is because the opening sizes vary so much. They do provide all the necessary hardware and (excellent) templates for drilling holes. You have to measure, buy and finish is the plywood for the door. Unfortunatly this can be pricey. I had to buy a whole 4x8 sheet of birch plywood and only used a fraction of it. The directions for the door assembly are a little less clear than the ladder install but I managed with out too much hassle. The only other thing I can think of now that I didn't think about when I was installing was that the ladder reduces the overall size of the attic access hole. We now have to re-box some things in the attic so we can fit them through the smaller access. Some bigger things in the attic may require removal of the stairs but I think that won't be too bad to do if/when I need to do it. It is great not having to stash a step ladder upstairs any more. I knew I had to do something after my wife fell off the step ladder while climbing out of the attic one day. This is a great alternative when you don't have the space for a real set of stairs.

Click Here to see more reviews about: Werner AA8 250-Pound Duty Rating Televator Aluminum Universal Telescoping Attic Ladder, 8-Foot

Werner AA Series Televator Telescoping Attic Ladders go where other attic ladders simply can't. Ideal for small openings, closets, and other tight spaces, these ladders are designed for easy one-person installation and can help you quickly and inexpensively gain access to your attic.
Gain Quick Access to Your AtticWhen you install a Werner AA Series Televator Telescoping Attic Ladder in a closet, hallway, or other tight space, you immediately utilize untapped storage, creating space for bins and boxes that might otherwise clutter up your home or garage. Adding this ladder eliminates unsafe climbing practices when you're trying to access storage space, and the telescoping design makes it easy to use.
Strong and ReliableWith wide 2-7/8-inch steps and sturdy rails with eased edges, these professional quality ladders offer optimal stability, so you can safely carry items up and down. Each AA Series ladder has a load capacity of 250 pounds (combined weight of the person and what they're carrying), has a compact design, and features non-marring feet to keep your floors free of scratches.
Easy, One-Person InstallationAA Series attic ladders have a floor-to-ceiling height range of 7 feet 4 inches to 10 feet 3 inches. They can be installed into any opening with a minimum of 22 inches by 22 inches, and they have a comparable clearance to traditional 25-inch-wide attic ladders. Hardware for the door is included (door not included), and one person can complete the easy installation process alone--no cutting is required.
Once the ladder is installed, an included assist pole allows for safe opening and closing without straining your back or arms.
About Werner: The Pros' ChoiceWerner, the most trusted name in ladders, is preferred by pros more than any other brand. For over 60 years, pros have looked to Werner to supply their climbing equipment needs. Werner manufactures a full line of safe, professional-grade products for any job, and it builds its ladders to withstand even the most challenging tasks--that's why Werner ladders are found on more jobsites than any other brand.
What's in the Box AA Series Televator Telescoping Attic Ladder; door hardware and templates; and instruction manual. (Plywood for the door is not included).


Buy NowGet 48% OFF

Click here for more information about Werner AA8 250-Pound Duty Rating Televator Aluminum Universal Telescoping Attic Ladder, 8-Foot

9/12/2011

Pass & Seymour 660LAGCP Trademaster Single Pole Switch, Light Almond, 10-Pack Review

Pass and Seymour 660LAGCP Trademaster Single Pole Switch, Light Almond, 10-Pack
Average Reviews:

(More customer reviews)
Presented as advertised and delivered in a timely manner. Will shop here again, without hesitation.

Click Here to see more reviews about: Pass & Seymour 660LAGCP Trademaster Single Pole Switch, Light Almond, 10-Pack

10 Pack, 15A, 120V, Light Almond, Grounded, Standard Single Pole Toggle Switch, UL Listed, CSA, Smooth Quiet Action, Side & Speed Wire, High Impact Resistant Construction, Extra Long Strap, Contractor Pack.

Buy Now

Click here for more information about Pass & Seymour 660LAGCP Trademaster Single Pole Switch, Light Almond, 10-Pack

7/11/2011

FastCap 3rd Hand Support System 57-to-144-Inches, 2-pack #3HAND5 Review

FastCap 3rd Hand Support System 57-to-144-Inches, 2-pack #3HAND5
Average Reviews:

(More customer reviews)
For some reason, they do not want to provide many details about this product. So I'll fill in the blanks. The maximum weight limit is 70 pounds. The blue body is made out of steel. The top and bottom plates, and the squeeze handle are made out of plastic. There is a non-marring rubber pad on both the top and bottom plates. The plates swivel on a plastic ball joint. The total shipping weight is 13 pounds. Made in China. Overall I'm quite happy with it. The reason I gave it 4 stars is I'm not sure how long the plastic ball joints are going to last. Time will tell.

Click Here to see more reviews about: FastCap 3rd Hand Support System 57-to-144-Inches, 2-pack #3HAND5



Buy Now

Click here for more information about FastCap 3rd Hand Support System 57-to-144-Inches, 2-pack #3HAND5

4/24/2011

Gilmour 20-18 Commercial Pole Saw Review

Gilmour 20-18 Commercial Pole Saw
Average Reviews:

(More customer reviews)
The three piece pole is much stiffer than the collapsing ones making for better saw control. The saw teeth are a little aggressive making it difficult to trim a branch off another branch. It works fine for cutting limbs at the trunk. A fine toothed saw blade would be a good option.

Click Here to see more reviews about: Gilmour 20-18 Commercial Pole Saw



Buy Now

Click here for more information about Gilmour 20-18 Commercial Pole Saw

3/24/2011

Fiskars 9240 Telescoping Pruning Stik Review

Fiskars 9240 Telescoping Pruning Stik
Average Reviews:

(More customer reviews)
This pole pruner performs excellently.
I found the following features to be especially useful:
- rotating head, allows easy cuts of branches at different angles.
- no additional rope to pull, makes for easy cutting and handling.
- saw blade is sharp and it also allows user to change the angle of the blade so that you can saw more efficiently.
Features I wish it had:
- the ability to cut more than its 1 & 1/4-inch cutting capacity.
- when using the saw blade, the FULLY extended handle flexes a bit more than I prefer.
Overall this telescopeing pole pruner is excellent.
I have been using mine regularly to prune trees for over a year and it still cuts as sharply as it did on the first day.
By the way, some reviewers mentioned that the packaging was poor and they got a damaged product, they must have ordered it early before the new packaging was incorporated. My Pruning Stik arrived in good condition, it had a thick supporting cardboard piece to ensure the long box did not bend.

Click Here to see more reviews about: Fiskars 9240 Telescoping Pruning Stik

Spare yourself the effort of climbing trees to reach far-off branches with this convenient and powerful telescoping pruning tool from Fiskars. The Pruning Stik's fiberglass outer pole and aluminum inner pole extend to a full 12 feet, allowing you to trim upper branches from the safety and security of the ground. Its extremely sharp cutting blade can be manipulated by pulling a rope or the pole's ergonomic handle. In addition, the sturdy cutting head rotates 240 degrees to enable you to choose the proper cutting angle for branches up to 1-1/4 inches in diameter. A 15-inch Woodzig saw blade is also included for added cutting power.

Buy Now

Click here for more information about Fiskars 9240 Telescoping Pruning Stik

3/11/2011

Fiskars 9333 15-Inch Replacement Saw Blade Review

Fiskars 9333 15-Inch Replacement Saw Blade
Average Reviews:

(More customer reviews)
If you need a replacement saw blade for your tree pruner, this is the best one ever. It has sharp, greedy teeth which is good because the sharper the blade the faster the cutting and the sooner you get to go have a beer and relax. When you get the new blade be sure not to get excited and cut too many branches from your trees while you are trying it out. Otherwise, your trees will look like my neighbor's trees which look like Q-tips. Not that there's anything wrong with Q-tips. They are great for getting nasty yellow wax out of the ear. But trees should look like trees, not Q-tips.

Click Here to see more reviews about: Fiskars 9333 15-Inch Replacement Saw Blade

The Fiskars 15-inch replacement saw blade is designed for use with the Fiskars Tree Pruner, models #9301, #9300, #9261, and #9236. The saw blade features a patented Woodzig chainsaw-style tooth design for cutting on the pull stroke, resulting in less binding.

Buy NowGet 6% OFF

Click here for more information about Fiskars 9333 15-Inch Replacement Saw Blade