Decora Wall Switch with Pir Occupancy Sensor Review

Average Reviews:

(More customer reviews)If you are using compact fluorescent bulbs, this is not the switch you want. The lights flicker and it burns out the bulbs prematurely. If you are (and always will be) using incandescent it may suit your needs.

Click Here to see more reviews about: Decora Wall Switch with Pir Occupancy Sensor

Leviton R03-PR180-1LA 3 Way Single Pole Almond Decora Sensor Light Control, AlmondLeviton R03-PR180-1LA 3 Way Single Pole Almond Decora Sensor Light Control, Almond Features:; Switch Type: Single-Pole & 3-Way; Adjustment: Manual; Sensor Technology: Passive Infrared; Pattern Degrees: 180; Coverage Range Sq. Ft.: 400; Time Adjustment: 15s-15m; Load Rating: 40W/VA Min 500W 400VA Max; Voltage: 120 Volt AC 60Hz; Neutral: Not Required; Photo Cell: Ambient Override ON; Color: Almond; Standards and Certifications: UL/CSA; Warranty: 2-Year Limited"; Fit in standard wallboxes and are equipped with passive infrared (PIR) sensing technology; Turns lights on when a person enters a room and off when; they leave automatically; Can be used in a variety of residential applications, including; bathrooms, basements, pantries, garages, utility and laundry rooms, dining rooms, hallways, closets, and kitchens; Can be used with incandescent and fluorescent lighting; 180; field of view and 400 sq ft of coverage; Limited 2 year warranty; UL listed and CSA certified; Almond

Get 11% OFF

Click here for more information about Decora Wall Switch with Pir Occupancy Sensor

GE® Motion Sensing Switch - 2 Pack Review

Average Reviews:

(More customer reviews)If you use Compact Flourescent Lights this type of motion sensor does not work- the CFLs will flicker instead of turning off. CFLs are not compatible with most automatic-on motion sensors as they still require a bit of current flow. You need a motion sensor that includes a neutral wire, which is unfortunate for me as the wiring in my house is old and doesn't have neutral wires.

Click Here to see more reviews about: GE® Motion Sensing Switch - 2 Pack

The GE Motion Sensing Switch automatically turns the light on when motion is detected. Built-in timer lets you set the length of time the light stays on--from five seconds to 20 minutes after motion ceases. Motion Sensing Switch can also be adjusted to ignore motion during daylight hours. Save energy go green! Ratings: 120VAC Electrical Input, 500W Max Incandescent, halogen and xenon. 30W Min-400W max rapid start fluorescent (2 tube min) 1/8 HP maximum motor. Single Pole Appllication for one switch circuit - For permanently installed fixture only.

Click here for more information about GE® Motion Sensing Switch - 2 Pack

WATT STOPPER / LEGRAND RS-250-W-CS LIGHT AND FAN CONTROLS SWITCH Review

Average Reviews:

(More customer reviews)Replaced a previous motion sensor that did not work with CFL or LED lights. I use this switch in the mode where the light turns on when motion is detected (it also has a vacancy mode). This switch works with both CFL and LED lights. Also, this switch actually turns off the power completely when the light goes off, unlike another one I tried. A couple things to note are that this switch requires a neutral in addition to power and ground. Also (at least in the mode I use it) you can manually turn on or off the light with the switch, but after it stops detecting motion for a while, it will revert back to automatic operation. It feels well constructed. Great switch!

Click Here to see more reviews about: WATT STOPPER / LEGRAND RS-250-W-CS LIGHT AND FAN CONTROLS SWITCH

Sold as each. Single pole. 3 wire. 120 volts. 60 HZ. 0 to 600 watts. Incandescent or fluorescent. 1/6 HP fans. Adjustable delay 1 to 30 minutes. 180 degree passive infrared sensor coverage. 600 sq. ft. Indoor residential application. Use in bedrooms, bathrooms, dining, family and utility rooms. UL listed. California title 24 compliant. White With White Plate. Manufacturer's number: RS-250-W-CS. Country of origin: China. Distributed by .

Get 22% OFF

Click here for more information about WATT STOPPER / LEGRAND RS-250-W-CS LIGHT AND FAN CONTROLS SWITCH

Heath Zenith SL-6105-IV Motion Activated Wall Switch Review

Average Reviews:

(More customer reviews)This switch works ok, but if you want to use it with the energy efficient fluorescent bulbs forget it. This switch didn't work properly until we changed the bulbs to the incandescent type.

Click Here to see more reviews about: Heath Zenith SL-6105-IV Motion Activated Wall Switch

SL-6105-IV Features: -Motion activated single pole wall switch. -Material: Plastic. -Color: Ivory. -Wall switch allows lights to turn on automatically with motion. -150 Degree motion detection range up to 30 feet away. -Controls up to 500 watts of incandescent lighting and 400 watts of fluorescent lighting. -Selectable light timer from 5 seconds to 25 minutes. -1 Year manufacturer's warranty. -No assembly required. -Dimensions: 4.5'' H x 2.75'' W x 1.63'' D. Installation Sheet

Click here for more information about Heath Zenith SL-6105-IV Motion Activated Wall Switch

Heath Zenith SL-6106-WH Vacancy Motion Sensor Wall Switch Review

Average Reviews:

(More customer reviews)This works exactly as written which is to say not as I expected (my fault for preconceived notions). This switch will not sense when somebody comes in to the room and turn the lights on. Instead, you have to press the button to turn the lights on and as long as it detects motion the lights stay on. If no motion for programmed period of time, then they turn off. Very easy to install, works as advertised. I would recommend it if you don't need the lights to turn on automatically.

Click Here to see more reviews about: Heath Zenith SL-6106-WH Vacancy Motion Sensor Wall Switch

SL-6106-WH Features: -Vacancy motion sensor single pole wall switch. -Material: Plastic. -Color: White. -Lights turn off automatically after motion stops-push button can be used to turn lights on. -180 Degree motion detection range up to 30 feet away. -Controls up to 500 watts of incandescent lighting and 400 watts of fluorescent lighting. -Selectable light timer from 5 seconds to 25 minutes. -1 Year manufacturer's warranty. -No assembly required. -Dimensions: 4.5'' H x 2.75'' W x 1.63'' D. Installation Sheet

Get 14% OFF

Click here for more information about Heath Zenith SL-6106-WH Vacancy Motion Sensor Wall Switch

Leviton ODS15-IDW Decora Passive Infrared Wall Switch Occupancy Sensor, 180 Degree, 2100 sq. ft. Coverage, Self-Adjusting, White Review

Average Reviews:

(More customer reviews)Picked up some of these, along with the dual relay switch of the same family ... Leviton ODS0D-IDW Dual-Relay, Decora Passive Infrared Wall Switch Occupancy Sensor, 180 Degree, 2100 sq ft Coverage, White
... for use around the house. Besides being commercial duty instead of just residential duty, they are relay based, so CFLs work fine on these.
Unlike other occupancy sensors, these have one very nice feature - adjustable ambient light detection. In the auto-on mode, it'll only turn on the light if there's insufficient ambient light (ie. it's dark out) and won't if there is enough light (ie. daylight through the windows). Likewise, it can be completely disabled for manual-on/auto-off operation only (Title 24). The coverage is excellent and sensitive - you walk into the room, and it knows you're there, unlike some cheaper ones in which you'd almost have to dance right in front of the sensor for it to detect anything. Even at the far end of the hallway here, over 20 feet away, it can detect motion. If you don't want that much range or angle coverage, you can adjust those down too.
Style wise, it's nice that the sensor isn't like some pucker mouth protrusion as with some other models. It is sleekly integrated with the rest of the switch.
Installation wise, NO neutral wire is required. A common ground wire still is, however. It is wider and deeper than a regular switch, though, so you may have issues if your j-box is small.
Minor nit - the time delays are preset. Too minor to ding a star, though - the other features, besides the fact that IT WORKS, more than justify the 5 stars.

Click Here to see more reviews about: Leviton ODS15-IDW Decora Passive Infrared Wall Switch Occupancy Sensor, 180 Degree, 2100 sq. ft. Coverage, Self-Adjusting, White

The Leviton ODS15 Decora Passive Infrared Wall Switch Occupancy Sensor provides automatic lighting control, and is useful for a variety of commercial and residential settings. This switch utilizes two passive infrared (PIR) sensors and is compatible with both electronic and magnetic ballasts. Two operating modes respond either to all motion or to changes in ambient light. A pre-shutoff warning, manual override, walk-through feature, and an adjustable field-of-view provide multiple options to satisfy your real-world lighting conditions.
Adjustable Lighting for Multiple SettingsWhen this switch is installed, lights will turn on as motion is detected, providing a safe environment for personnel who might otherwise walk into a darkened room. Change the settings and the switch relies on ambient light before switching on. A manual override makes it possible to toggle the lights on or off like a regular switch, or set a manual on/auto off to satisfy certain building codes.
The ODS15 has adjustable blinders so you can get only the PIR sensitivity you need. You can save additional energy by changing the delayed-off from 30 minutes to 30 seconds with the time delay adjustment. For supreme user convenience, this switch requires a single screwdriver for easy installation.
No More Blackouts and No Unnecessary LightingFactory set for a 10-minute delayed-off time, the switch self-adjusts up to 30 minutes to compensate for real-time occupancy patterns. It beeps three times as a warning shortly before shutting off the lights, giving you a chance to reactivate the sensor. The unit also offers a walk-through feature that shuts lights off after momentary occupancy, providing increased energy savings.
Durable and Versatile DesignThe ODS15 is compatible with both electronic and magnetic ballasts. The sensor switches on or off at the zero crossing point of the AC power curve for contact durability and compatibility with electronic ballasts. Useful with 120- to 227-volt lighting, the circuitry in this switch is specifically designed to handle today's high inrush of electronic ballast loads. For retrofitting into older wiring systems, neutral-free wiring is an option.
This product comes with a manufacturer's limited five-year warranty.
What's in the BoxThe ODS15 Decora Passive Infrared Wall Switch Occupancy Sensor, mounting screws, and installation instructions.

Get 8% OFF

Click here for more information about Leviton ODS15-IDW Decora Passive Infrared Wall Switch Occupancy Sensor, 180 Degree, 2100 sq. ft. Coverage, Self-Adjusting, White

Leviton OSSNL-IDW Decora Passive Infrared Wall Switch Occupancy Sensor, LED Adjustable Night Light, 180 Degree, 1200 sq. ft. Coverage, White Review

Average Reviews:

(More customer reviews)I bought this to replace a Leviton PR180. The PR180 seemed to work on my 3 fluorescent lights (2 electronic ballasts, 1 magnetic), but then the bulbs started flickering and eventually went out.
The OSSNL went in with new bulbs and the difference was immediately noticeable. It was as if the lights were connected to a standard switch! Not a hint of buzzing. Definitely worth the extra money for this switch.
I was very impressed by the configuration options in this switch, and spent about an hour testing everything and getting it right. It's great!
02/17/2010 Followup review:
Lowering my rating on this switch because now it is behaving strangely. The switch is installed in my garage and typically the lights are off when I open the garage door, then they turn on as soon as I step on the garage stairs. Recently I had noticed that the lights were on when I arrived home from work, and were on when I would first open the garage door. The switch was not turning off the lights after the 30 second timeout! I tried the manual on/off, and that would shut the lights off but they would not turn back on when I moved in front of the sensor. Even though nothing had changed with the switch configuration, it began functioning strictly as a manual on/manual off switch. As a final fix attempt I ended up flipping the circuit breaker that the switch was attached to, and now it appears to be working again. We'll see how long that lasts. Very strange and frustrating.
03/10/2010 Followup review:
It seems this switch has now completely stopped functioning as a motion-sensing switch. Despite repeating my previous efforts, I was unable to get the lights to turn off in either auto or manual mode. Perhaps I got a lemon. I've uninstalled the switch and will be sending it to Leviton for a replacement under warranty. Hopefully the next switch does not have these problems.
04/25/2010 Followup review:
Leviton sent me a new swtich approximately 2 weeks ago (so expect a 1-month turnaround if you send in a defective switch). So far it is working properly. I will update this review again later after the new switch has been installed for a longer period of time.
06/14/2010 Followup review:
Well it's been two months since I installed the new switch, and it's still working properly. Seems I just got a lemon the first time.

Click Here to see more reviews about: Leviton OSSNL-IDW Decora Passive Infrared Wall Switch Occupancy Sensor, LED Adjustable Night Light, 180 Degree, 1200 sq. ft. Coverage, White

The Leviton OSSNL-IDW Designer Occupancy Sensor Wall Switch with LED NightLight provides occupancy detection and a night light in one attractive wall switch. With the occupancy sensor, you'll get energy savings and increased safety, and with the night light, you'll get a comfortable, low level of light that helps guide you without activating general lighting.
Passive Infrared Technology Detects MotionThe OSSNL-IDW works via a passive infrared sensor to automatically switch lights on. The lights will remain on until no motion is detected and the preset wait time has expired--you can choose from among four time delay settings--30 seconds, 30 minutes, one hour, or two hours.
The occupancy sensor features a proprietary segmented Fresnel lens that provides optimum sensitivity and performance. Designed with an extensive "small-motion" area, the lens will detect even the slightest body movements within its horizontal 180-degree field of view.
For convenience, the sensor has two independently operating blinders that you can program to narrow the field of view (between 180 and 32 degrees) and prevent unwanted activation from traffic in adjacent space.
Push-Button Toggling Between On and Off ModesThe OSSNL-IDW features a push-button switch for manual selection of on and off modes. In 'on' mode, the lights will remain on in the presence of motion; in the absence of motion, the sensor unit will time-out and turn the lights off.
In 'off' mode, the lights will stay off regardless of motion detected, until the time-out expires. After the time-out expires, the lights will turn on (auto-on mode only) with the next detected motion. This feature is especially useful when you're making slide or film presentations.
Adjustable LED Night Light Guides You in the DarkIn addition to a motion sensor, the OSSNL-IDW features an LED NightLight. The NightLight operates separately from the lights that are controlled by the sensor, and it will turn on when its photocell detects ambient light that is less than one foot-candle. It will turn off when the ambient light exceeds five foot-candles.
The LED NightLight is adjustable for continuous mode or dimmed mode. In dimmed mode, the LED adjusts to five percent of full brightness after motion has not been detected for two minutes. You can choose the amount of illumination with a simple dial setting.
In continuous mode, the LED NightLight will go to full brightness (per your dial setting) when occupancy is detected and when the ambient light level is less than one foot-candle. It will return to the low setting when occupancy is no longer detected and the ambient light level is less than one foot-candle.
Ideal for Hospitals, Hotel Rooms, and MoreThe OSSNL is perfect for use in hospitality and health care facilities that have either auto or manual 'on' settings with adjustable time delays of 30 seconds to two hours.
It is also ideal for hotel rooms, conference rooms, class rooms, small offices, lounges, storage areas, bathrooms, and anywhere else you want automatic lighting control that will give you energy savings, improved safety, and convenience.
If you're looking to save energy, you'll be happy to know that the LED NightLight consumes less than one half of a watt while providing guide lighting when room lights are off.
Easy InstallationThe OSSNL-IDW is factory preset to deliver optimum performance in a wide variety of applications without any adjustments during installation. The unit can replace a single-pole wall switch mounted in a standard wall box, and it is gangable with other units. For further convenience, the unit features zero-crossing circuitry to enhance reliability and provide long-term operation. The OSSNL-IDW has a maximum coverage area of 1,200 square feet.
In order to operate, the OSSNL-IDW must have a neutral connection and must be properly grounded. Also, it should be positioned at least four feet away from HVAC registers. Note that when the unit is powered up, it will take approximately one minute to begin normal operation.
The OSSNL-IDW is UL and cUL listed and is NOM and CEC Title-24 Compliant. It is backed by a five-year limited warranty.
What's in the BoxOSSNL-IDW occupancy sensor wall switch with night light.

Get 38% OFF

Click here for more information about Leviton OSSNL-IDW Decora Passive Infrared Wall Switch Occupancy Sensor, LED Adjustable Night Light, 180 Degree, 1200 sq. ft. Coverage, White

Leviton ODS10-ID Decora Wall Switch Occupancy Sensor (120/277V rating), White Review

Average Reviews:

(More customer reviews)I installed one of these in my laundry room (which is located just inside the garage door in my house). Now, whenever we come home, we don't have the fumble for the light switch. I've also installed one in the room that my wife uses for her office for the same reasons.
This switch comes with three adjustments to customize it to your needs.
First, it has an ambient light adjustment so that you can tell it not to turn on if there is already sufficient light in the room. If you turn this setting all the way up, the switch will become a manual on, auto off switch that will only turn on when you push the button, but will turn off after it senses no motion for a set period of time.
Second, it has a sensitivity adjustment, which adjusts how far the sensor will look for motion.
Third, it has a duration adjustment to tell it how long it should wait with no motion before turning the light off.
It also has a red LED, which blinks whenever it detects motion, so you can tell how whether your movements are being detected or not.

Click Here to see more reviews about: Leviton ODS10-ID Decora Wall Switch Occupancy Sensor (120/277V rating), White

The Leviton ODS10-ID Decora Wall Switch Occupancy Sensor is the ideal energy-saving choice to provide automatic (Auto ON/Auto OFF and Manual ON/Auto OFF) lighting control in a variety of commercial applications, including offices, conference rooms, multimedia rooms, child-care centers, and more. The ODS10 is the perfect solution for controlling a wide variety of load types. It features a low-profile digital design and vandal-resistant PIR lens. It does not require a neutral connection, and it installs in place of a single-pole wall switch to fit in a standard wall box.
ODS10-ID Decora Wall Switch Occupancy SensorAt a Glance:

Get 44% OFF

Click here for more information about Leviton ODS10-ID Decora Wall Switch Occupancy Sensor (120/277V rating), White

Cooper Lighting N150HNCI 150W High Pressure Sodium Industrial Grade Security Dusk to Dawn Area Light Review

Average Reviews:

(More customer reviews)Had to return the light before it could be used. I guess the price was too cheap because it was damaged. Why are all those old sayings coming back around? Buyer Beware. If its too good to be true than it probable is. Guess its a sign of the times.

Click Here to see more reviews about: Cooper Lighting N150HNCI 150W High Pressure Sodium Industrial Grade Security Dusk to Dawn Area Light

Sold as each. 150 watt (lamp included). Ideal for area lighting applications such as commercial, residential streets, parking areas, farm yards, and parks. Replaceable twist lock photo control included. Die cast aluminum housing. 12' high impact prismatic lens and aluminum reflector. 24" mounting arm with hardware. Pole or wall mounted. Replacement bulb SKU #3992377. 1 year warranty. Boxed. Manufacturer number: N150HNCI. Country of origin: China. Distributed by Cooper Lighting.

Get 3% OFF

Click here for more information about Cooper Lighting N150HNCI 150W High Pressure Sodium Industrial Grade Security Dusk to Dawn Area Light

Heath Zenith SL-6107-WH Motion Activated Wall Switch Review

Average Reviews:

(More customer reviews)It works great. I wanted this for a while for our kitchen as it has no natural light coming in. We are always walking in or out with our hands full and I sometimes spill my drink trying to turn off the lights as I leave. Then after having our first child I was finally sold on getting one as my wife is always carrying the baby around.
As mentioned before it is a three way switch but I just used it as a single. Easy to setup the, the part that goes into the wall is slightly deeper than a normal switch but was also not as tall.
It has two great features:
Someone mentions that it doesn't have a choice of times for the lights to turn back on, not sure why they say that but this does have multiple time settings. You have 5s, 1m, 5m, 10m, 15m, 20m. Now I wish there were a few more time interval options like maybe 30 seconds, and a 2 minute one, but that is really not that big of an issue.
This also lets you adjust the photo sensitivity, so if your room has enough natural light during the day and you don't want this to turn on when the room already has enough light you can adjust that as well. I didn't try this as again my kitchen gets no natural light.
Both of these setting are under a small cover that is just above the switch (it has the "on", "off", "auto" positions written on it), you use a small screw driver to open the panel and then turn to the desired settings.
I have this connected to six lights, two are florescent lights. Have been using it for about a month now, hopefully it will last for a while, but considering the price and features it is a really good deal.

Click Here to see more reviews about: Heath Zenith SL-6107-WH Motion Activated Wall Switch

Motion Sensing Wall Switches Type: 3-Way Wall Switch w/Decor Cover Plate Coverage in Square Feet: 900 Color: White

Get 6% OFF

Click here for more information about Heath Zenith SL-6107-WH Motion Activated Wall Switch

Enerlites DWOS-J-W Commercial Infrared Single Pole PIR Wall Switch Occupancy Sensor, Title 24, White Review

Average Reviews:

(More customer reviews)This is a great little switch; once installed, the sensing is rock solid and I love the adjustable timing and behavior pattern (walk through, learning mode, etc). It also has an on/off switch for when you want to turn it on/off manually. This is definitely the switch you need for electronic ballasts; the zero crossing function/feature is something you want on flourescent lights with electronic ballasts; if you know you will only be using this switch with incadescent or halogen, you can go for the cheaper residential switch.
I took one star off because I don't like the pigtails it comes with; in my opinion, a professional grade switch should have screw terminals to terminate the 12 gauge wire you will probably be connecting this to; instead it has stranded wire that you need to terminate your solid wire to. Not unheard of, but a pet peeve of mine. Make sure it's in tight!
Also, you WILL need a ground; most switches let you forego the ground (although it's highly recommended) and use the neutral, but there is no neutral on this; must have something to do with the zero crossing feature. connections are Hot, ground, and load.

Click Here to see more reviews about: Enerlites DWOS-J-W Commercial Infrared Single Pole PIR Wall Switch Occupancy Sensor, Title 24, White

Turn lights on/off automatically with the Enerlites DWOS-J Commercial Grade PIR Wall Switch Occupancy and Vacancy Sensor. The Occupancy portion of the sensor will automatically turn the lights on when someone enters the room. Then, after an amount of time set by the user, the vacancy sensor will turn off the light. The DWOS-J Sensor requires only 3 wires (hot, neutral, and ground) and can still control incandescent and fluorescent lights, motors, and most other load types. Adjustable time delay and motion sensitivity make the Sensor very customizable.

Get 31% OFF

Click here for more information about Enerlites DWOS-J-W Commercial Infrared Single Pole PIR Wall Switch Occupancy Sensor, Title 24, White

GE 57884 Motion Sensing or On/Off Light Switch, Single Pole, Ivory Review

Average Reviews:

(More customer reviews)I fool this to work with CFLs without the dance floor flashing effect by including one old style incandescent spot light among the CFL spots in the ceiling.
The unit works fine now for over a year in that mode and reduces electric cost by 41%.
The old style bulb evidently fools the circuit and the CFLs go along for the ride. The timer is adjustable with a thin screwdriver for the desired "turn off" delay after someone leave the room
In addition, there is another adjustable screw allowing it to NOT turn on the lights when there is daylight through the room windows. This of course is most useful if the switch faces the window and useless if the room has no windows.
I got this one in a local store
http://www.amazon.com/57884-Motion-Sensing-Switch-Single/dp/B0006JMNJ6/ref=sr_1_2?ie=UTF8&s=hi&qid=1271431639&sr=1-2
The Leviton brand did not work in this manner and caused the flashing light dance floor effect; the GE works fine.


Click Here to see more reviews about: GE 57884 Motion Sensing or On/Off Light Switch, Single Pole, Ivory

MOTION-SENSING SWITCH TURNS LIGHTS ON AUTOMATICALLY WHEN SOMEONE ENTERS THE ROOMSENSOR DETECTS MOTION IN A 150RANGE UP TO 30-FT AWAYBUILT-IN TIMER LETS USER SET LENGTH OF TIME LIGHT STAYS ON AFTER MOTION CEASES FROM 5 TO 20 MINIVORY

Get 66% OFF

Click here for more information about GE 57884 Motion Sensing or On/Off Light Switch, Single Pole, Ivory

Enerlites WOS15-W Passive Infrared Single Pole Wall Switch Occupancy Sensor, White Review

Average Reviews:

(More customer reviews)I have to say I've installed many dimmers, switches, fan controls, and timers. This one was a little confusing at first due to the extra wire. The way to install it is to find the "white" wireset that should be bundled in your gangbox and attach the white wire to that. Then the black wire and red wire go to the two wires that previously went to your wall switch. The green goes to ground, of course.
Once past that, I fiddled a bit with the time, trying to get the light to stay on only 1 minute as I have this in a laundry room between house and garage. I mostly wanted it so a light will come on when I open the door to go inside. The settings are controlled by small rotary dials. So it's hard to be exact. But it's easy to get it good enough.
There's a knob to have it also check ambient light before turning on. If enough light is present, it won't turn on. It comes pre-set so that lighting is ignored and it always comes on.
I couldn't find one of these locally in almond. I bought this product in ivory, which is lighter than the wall plate, but not as white as the white version. Lowes has wall plates similar in color to this unit.
I have it on a circuit with one CFL bulb and it works fine with it. If you read the reviews, other brands seem to have a problem with CFL's.

Click Here to see more reviews about: Enerlites WOS15-W Passive Infrared Single Pole Wall Switch Occupancy Sensor, White

Turn lights on and off with the Enerlites WOS15 WH Passive Infrared Wall Switch Occupancy Sensor. When an individual enters the room, the sensor automatically turns the lights on. When there is no more movement in the room and a set amount of time passes, the lights will then automatically go off. If a user turns the light on/off at the switch, it will remain on/off until returned to 'auto.' Adjustable time delay and motion sensitivity make the Sensor very customizable.

Get 17% OFF

Click here for more information about Enerlites WOS15-W Passive Infrared Single Pole Wall Switch Occupancy Sensor, White

Leviton PR150-1LW 500W, Single Pole, 150 Degrees, 350 sq. ft. Passive Infrared Wall Switch Occupancy Sensor, Residential Grade, White Review

Average Reviews:

(More customer reviews)I have installed a couple of these switches, and they are not just plug-in and forget. The mini-manual the comes with them gives details, but in chinese-english that is hard to understand.
(1) Setup - There are two small thumb-wheel controls beside the motion-sensor. The one is for setting the length of time the switch is ON, and is obvious. The other one is quite delicate and compensates for ambient lighting and the lighting of the moving object. This is especially tricky when the motion sensor has a window in its view, and the ambient light it sees changes from day to night. If you have a window facing the switch, it would be best to put a blind in it to filter out some of the ambient light changes. With patience, I was able to get the switch to work well even though it faced a window. But it takes trial-and-error to compensate for motion during both day and dusk (it doesn't work at night).
(2) Flickering fluorescents - With the widespread conversion to fluorescent lighting, there is a new problem. The small screw-in spiral bulbs that replace incandescent lights have electronic "ballasts", which are totally different from those on the long fluorescent tubes. This motion-sensing light switch does not go completely OFF when there is no motion. A sensitive VOM will measure about 30+ volts on the hot line. However, there is little current available. The 30+ volts is enough to trigger the ballast on the spiral fluorescents, and it tries to light the lamp, however there is not enough current available and the light tries to go on, drains the minimal charge on the line, and then goes out. This repeats and you get a flicker. ---- You can solve this by replacing one of your lights with an incandescent lamp. This will constantly drain the charge trickle through the switch and prevent the voltage building up to trigger the ballast. I have used 45W and 60W bulbs, and both work. They just go in parallel with your spiral fluorescents. And you should no longer have any flicker.
**** With careful installation, these switches work quite well. My wife expecially appreciates the one in our laundry room which goes on automatically when she comes in with piles of laundry (we have a traditional marriage).

Click Here to see more reviews about: Leviton PR150-1LW 500W, Single Pole, 150 Degrees, 350 sq. ft. Passive Infrared Wall Switch Occupancy Sensor, Residential Grade, White

Leviton R02-PR150-1LW 40W/VA Min 500W 400VA Max, 120 Volt AC 60Hz, Single-Pole, 150 Degree, 350 Sq. Ft. Coverage, Decora Passive Infrared Wall Switch Occupancy Sensor, Residential Grade - WhiteLeviton R02-PR150-1LW 40W/VA Min 500W 400VA Max, 120 Volt AC 60Hz, Single-Pole, 150 Degree, 350 Sq. Ft. Coverage, Decora Passive Infrared Wall Switch Occupancy Sensor, Residential Grade - White Features:; Switch Type: Single-Pole; Adjustment: Manual; Sensor Technology: Passive Infrared; Pattern Degrees: 150; Coverage Range Sq. Ft.: 350; Time Adjustment: 15s-15m; Load Rating: 40W/VA Min 500W 400VA Max; Voltage: 120 Volt AC 60Hz; Neutral: Not Required; Photo Cell: Ambient Override ON; Color: White; Standards and Certifications: UL/CSA; Warranty: 2-Year Limited"; Residential grade; Decora passive infrared wall switch occupancy sensor; Single-pole; Ambient override On photo cell; Manual adjustment; 15s-15m time adjustment; 150º pattern; 350 square feet coverage range; UL and CSA Standards and Certifications; 2 year limited warranty

Get 20% OFF

Click here for more information about Leviton PR150-1LW 500W, Single Pole, 150 Degrees, 350 sq. ft. Passive Infrared Wall Switch Occupancy Sensor, Residential Grade, White